Main Article Content
Abstract
At present NPO Saturn possesses the complex of technologies, which allow obtaining the most efficient technical solutions when creating up-to-date gas-turbine engines and their components. In this paper there are presented the examples researches aimed at axial compressors perfection basing on up-to-date analysis and optimization tools. As the analysis tools there are used the well-known commercial software packages (CFX-TASC flow, ANSYS etc.), as well as the models developed by NPO Saturn; the adequateness of latter had been proved by experimental data. To rise the efficiency and margins of gas dynamic stability for multistage axial compressors NPO Saturn is using widely the methods of CFD and optimization based on IOSO technology. In the paper there are presented some examples of real-life problems solution.
Keywords
Article Details
References
- Egorov, I.N. and Kretinin, G.V., "Search for Compromise Solution of the Multistage Axial Compressor’s Stochastic Optimization Problem", World Publishing Corporation, Aerothermo-dynamics of internal Flows III, Beijing, China, 1996, pp.112-120.
- Egorov, I.N., "Indirect Optimization Method on the Basis of Self-organization", Curtin University of Technology, Optimization Techniques and Applications (ICOTA’98), Perth, Australia, 1998, Vol.2, pp.683-691.
- Egorov, I.N., Kretinin, G.V., Leshchenko, I.A. and Babiy, Y.I., "Optimization of Complex Engineering Systems Using Variable-fidelity Models", MCB University Press, ISBN: 0-86176-650-4, in Proceedings of the 1st ASMO UK/ISSMO Conference on Engineering Design Optimization, 1999, pp.143-149.
References
Egorov, I.N. and Kretinin, G.V., "Search for Compromise Solution of the Multistage Axial Compressor’s Stochastic Optimization Problem", World Publishing Corporation, Aerothermo-dynamics of internal Flows III, Beijing, China, 1996, pp.112-120.
Egorov, I.N., "Indirect Optimization Method on the Basis of Self-organization", Curtin University of Technology, Optimization Techniques and Applications (ICOTA’98), Perth, Australia, 1998, Vol.2, pp.683-691.
Egorov, I.N., Kretinin, G.V., Leshchenko, I.A. and Babiy, Y.I., "Optimization of Complex Engineering Systems Using Variable-fidelity Models", MCB University Press, ISBN: 0-86176-650-4, in Proceedings of the 1st ASMO UK/ISSMO Conference on Engineering Design Optimization, 1999, pp.143-149.