Main Article Content

Abstract

Fabrication of nanocomposites for different-clay (alumino-silicate) concentrations (1, 3, 5 and 10 wt%) with the matrix (epoxy) is done by using shear mixer. This paper presents the experimental study of free vibration and damping characteristics. The work also involves vibration control of nanocomposite laminates by reinforcing organically modified montmorillonite clay in the epoxy matrix by resin casting technique. Theoretical study is also carried out to study the vibration and damping characteristics of epoxy clay nanocomposites. Dynamic result shows that the second phase nanoscale dispersion in the matrix significantly enhances the internal damping of nanocomposites. This work also presents the active vibration control of nanocomposite beams. Piezoelectric patches are bonded on the surface of beam and control algorithms are applied to the system. Feed forward (open loop) control algorithms are used to control the vibration. Maximum control is obtained for sample with 3 wt.%OC.

Keywords

Vibration, Damping, Vibration Control, Nanocomposite, Organoclay

Article Details

How to Cite
M. Ramesh Kumar, J. Chandradass, & R. Velmurugan. (2023). Experimental Studies on the Vibration Control of Epoxy Clay Nanocomposites. Journal of Aerospace Sciences and Technologies, 60(1), 49–59. https://doi.org/10.61653/joast.v60i1.2008.815

References

  1. Stenitzke and Martin Review: "Structural Ceramic Nanocomposites", Journal of European Ceramic Society, Vol.17, pp.l061-I082, 1997.
  2. Pinnavaia. T.J., "Intercalated Clay Catalyst", Science, 4595, 365-371, 1983.
  3. Fukushima, Y., Okada, A., Kawasumi, M., Kurachi, T. and Kamigaito, O., "Swelling Behavior of Montmorillonite by Poly-6-amide", Clay Minerals, Vol.23, pp.27-34, 1988.
  4. Mohan, T.P., Ramesh Kumar, M. and Velmurugan, R., "Mechanical and Barrier Properties of Epoxy Polymer Filled with Nanolayered Silicate Clay Particles", Journal of Materials Science, Vol. 41, No. 10, pp.2929-37, 2006.
  5. Velmurugan, R. and Karthikeyan, K., "The Reinforcement Effect of Nanoclay on the Damping Characteristics of Hybrid Laminated Composites", Journal of Aerospace Sciences and Technologies, Vol.3, pp.345-353, 2005.
  6. Balamurugan, V., "Active Vibration Control of Smart Beams, Plates and Shells using Piezoelectric Materials", M.S. Thesis, Indian Institute of Technology Madras, 2000.
  7. Shen, S., "A New Modeling Technique for Piezoeletrically Actuated Beams", Computers and Structures, Vol.57, No.3, pp.361-366, 1995.
  8. Devasia, S.M., Meressi, T., Panden, B. and Bayo, E.,"Piezoelectric Actuator Design for vibration Suppression-placement and Sizing", Journal of Guidance, Control and Dynamics, Vol.16, pp.859-864,
  9. Hanagud, S., Obal, M.W. and Calise, A.J., "Optical Vibration Control by the Use of Piezoceramic Sensors and Actuators", Journal of Guidance, Control and Dynamics, Vol.15, pp.1199-I206, 1992.
  10. Bailey, T. and Hubbard, J.E., "Distributed Piezoelectricity Polymer Active Vibration Control of a Cantilever Beam", Journal of Guidance, Control and Dynamics, Vol.8, pp.605-6II, 1985.
  11. Narayanan, S and Balamurugan, V., "Finite Element Modelling of Piezolaminated Smart Structures for
  12. Active Vibration Control with Distributed Sensors and Actuators", Journal of Sound and Vibration, Vol.
  13. /3, pp.529-562, 2003.
  14. Lin, J-C. and Nien, M.H., "Adaptive Control of a Composite Cantilever Beam with Piezoelectric
  15. Damping-modal Actuators/sensors", Composite Structures, Vol. 70, pp.170- 176, 2005.
  16. Rajoria, H. and Jalili, N., "Passive Vibration Damping Enhancement Using Carbon Nanotube-epoxy
  17. Reinforced Composites", Composites science and Technology, Vol. 65, pp. 2079-2093, 2005.
  18. Suarez, S.A, Gibson, R.F., Sun, C.T. and Chaturvedi, S.K., "The Influence of Fiber Length and Fiber
  19. Orientations on Damping and Stiffness of Polymer Composites Materials", Experimental Mechanics,
  20. Vol.17, pp.3499-3509, 1984.
  21. Moser, K. and Lumassegger, M., "Increasing the Damping of Flexural Vibration of Laminated FPC
  22. Structures by Incorporation of Soft Intermediate Plies with Minimum Reduction of Stiffness", Composites Structures, Vol.19, pp.321-333, 1988.
  23. Velmurugan, R. and Mohan, T.P., "Room Temperature Processing of Epoxy-clay Nanocomposites",
  24. Journal of Materials Science, Vol.39, pp.7333-7339, 2004.